omf load

Load command is used to put an image onto the hard disk of the node.

Usage: omf help load

Install a given disk image on the nodes in a testbed
Usage:
      omf-5.4 load [-h] [-i IMAGE_PATH] [-o TIMEOUT] [-t TOPOLOGY] [-c AGGREGATE]
 
      With: 
      -h, --help                print this help message
      -c, --config AGGREGATE    use testbed AGGREGATE
      -t, --topology TOPOLOGY   a valid topology file or description (defaults to 'system:topo:all')
                                (if a file 'TOPOLOGY' doesn't exist, interpret it as a comma-separated list of nodes)
      -i, --image IMAGE         disk image to load
                                (default is 'baseline.ndz', the latest stable baseline image)
      -o, --timeout TIMEOUT     a duration (in sec.) after which imageNodes should stop waiting for
                                nodes that have not finished their image installation
                                (default is 800 sec, i.e. 13min 20sec)
          --outpath PATH        Path where the resulting Topologies should be saved
                                (default is '/tmp')
          --outprefix PREFIX    Prefix to use for naming the resulting Topologies
                                (default is your experiment ID)
 
      Some Examples: 
                    omf-5.4 load
                    omf-5.4 load -t system:topo:all -i baseline-2.4.ndz
                    omf-5.4 load -t omf.nicta.node1 -i wireless-2.6.ndz
                    omf-5.4 load -t omf.nicta.node1,omf.nicta.node2 -i baseline.ndz -o 400
                    omf-5.4 load -t system:topo:circle -i my_Own_Image.ndz
                    omf-5.4 load -t my_Own_Topology -i baseline-2.2.ndz -t 600 -c grid
                    omf-5.4 load -t my_Own_Topology --outpath ./ --outprefix my_Own_Prefix

Two important arguments are TOPOLOGY describing the set of nodes one wishes to image , and !IMAGE specifying the name of the image one wants to load the nodes with. Typical command to load both nodes of sandbox 1 with the baseline image would look like:

Example: omf load -t all -i baseline.ndz

username@console.sb7:~$ omf load -t all -i baseline.ndz

 INFO NodeHandler: OMF Experiment Controller 5.4 (git c005675)
 INFO NodeHandler: Slice ID: pxe_slice 
 INFO NodeHandler: Experiment ID: pxe_slice-2013-01-16t14.56.02-05.00
 INFO NodeHandler: Message authentication is disabled
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 230 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load system:exp:imageNode
 INFO property.nodes: nodes = "system:topo:all" (String)
 INFO property.image: image = "baseline.ndz" (String)
 INFO property.domain: domain = "sb7.orbit-lab.org" (String)
 INFO property.outpath: outpath = "/tmp" (String)
 INFO property.outprefix: outprefix = "pxe_slice-2013-01-16t14.56.02-05.00" (String)
 INFO property.timeout: timeout = 800 (Fixnum)                                                                                          
 INFO property.resize: resize = nil (NilClass)
 INFO Topology: Loading topology 'system:topo:all'.
 INFO Experiment: Resetting resources
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [0 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [10 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [20 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [30 sec.]
 INFO ALL_UP: Event triggered. Starting the associated tasks. 
 INFO exp: Progress(0/0/2): 0/0/0 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 760 sec.
 INFO exp: Progress(0/0/2): 10/10/10 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 750 sec.
 INFO exp: Progress(0/0/2): 10/15/20 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 740 sec.
 INFO exp: Progress(0/0/2): 20/25/30 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 730 sec.
 INFO exp: Progress(0/0/2): 30/35/40 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 720 sec.
 INFO exp: Progress(0/0/2): 40/40/40 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 710 sec.
 INFO exp: Progress(0/0/2): 40/45/50 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 700 sec.
 INFO exp: Progress(0/0/2): 50/55/60 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 690 sec.
 INFO exp: Progress(0/0/2): 60/65/70 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 680 sec.
 INFO exp: Progress(0/0/2): 60/65/70 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 670 sec.
 INFO exp: Progress(0/0/2): 70/75/80 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 660 sec.
 INFO exp: Progress(0/0/2): 90/90/90 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 650 sec.
 INFO exp: Progress(1/0/2): 90/95/100 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 640 sec.
 INFO exp: Progress(2/0/2): 100/100/100 min()/avg/max (30) - Timeout: 630 sec.
 INFO exp:  ----------------------------- 
 INFO exp:  Imaging Process Done 
 INFO exp:  2 nodes successfully imaged - Topology saved in '/tmp/pxe_slice-2013-01-16t14.56.02-05.00-topo-success.rb'
 INFO exp:  ----------------------------- 
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO NodeHandler: Shutdown flag is set - Turning Off the resources
 INFO run: Experiment pxe_slice-2013-01-16t14.56.02-05.00 finished after 3:13