omf load

Load command is used to put an image onto the hard disk of the node.

Usage: omf help load

Install a given disk image on the nodes in a testbed
Usage:
      omf-5.4 load [-h] [-i IMAGE_PATH] [-o TIMEOUT] [-t TOPOLOGY] [-c AGGREGATE]
 
      With: 
      -h, --help                print this help message
      -c, --config AGGREGATE    use testbed AGGREGATE
      -t, --topology TOPOLOGY   a valid topology file or description (defaults to 'system:topo:all')
                                (if a file 'TOPOLOGY' doesn't exist, interpret it as a comma-separated list of nodes)
      -i, --image IMAGE         disk image to load
                                (default is 'baseline.ndz', the latest stable baseline image)
      -o, --timeout TIMEOUT     a duration (in sec.) after which imageNodes should stop waiting for
                                nodes that have not finished their image installation
                                (default is 800 sec, i.e. 13min 20sec)
          --outpath PATH        Path where the resulting Topologies should be saved
                                (default is '/tmp')
          --outprefix PREFIX    Prefix to use for naming the resulting Topologies
                                (default is your experiment ID)
 
      Some Examples: 
                    omf-5.4 load
                    omf-5.4 load -t system:topo:all -i baseline-2.4.ndz
                    omf-5.4 load -t omf.nicta.node1 -i wireless-2.6.ndz
                    omf-5.4 load -t omf.nicta.node1,omf.nicta.node2 -i baseline.ndz -o 400
                    omf-5.4 load -t system:topo:circle -i my_Own_Image.ndz
                    omf-5.4 load -t my_Own_Topology -i baseline-2.2.ndz -t 600 -c grid
                    omf-5.4 load -t my_Own_Topology --outpath ./ --outprefix my_Own_Prefix

Two important arguments are TOPOLOGY describing the set of nodes one wishes to image , and !IMAGE specifying the name of the image one wants to load the nodes with. If the imaging process does not does not finish within the default timeout period, that period can be increase by using the -o flag (e.g. -o 1600). Typical command to load both nodes of sandbox 1 with the baseline image would look like:

Example: omf load -t all -i baseline.ndz

username@console.sb7:~$ omf load -t all -i baseline.ndz

 INFO NodeHandler: OMF Experiment Controller 5.4 (git c005675)
 INFO NodeHandler: Slice ID: pxe_slice 
 INFO NodeHandler: Experiment ID: pxe_slice-2013-01-16t14.56.02-05.00
 INFO NodeHandler: Message authentication is disabled
 INFO Experiment: load system:exp:stdlib
 INFO property.resetDelay: resetDelay = 230 (Fixnum)
 INFO property.resetTries: resetTries = 1 (Fixnum)
 INFO Experiment: load system:exp:eventlib
 INFO Experiment: load system:exp:imageNode
 INFO property.nodes: nodes = "system:topo:all" (String)
 INFO property.image: image = "baseline.ndz" (String)
 INFO property.domain: domain = "sb7.orbit-lab.org" (String)
 INFO property.outpath: outpath = "/tmp" (String)
 INFO property.outprefix: outprefix = "pxe_slice-2013-01-16t14.56.02-05.00" (String)
 INFO property.timeout: timeout = 800 (Fixnum)                                                                                          
 INFO property.resize: resize = nil (NilClass)
 INFO Topology: Loading topology 'system:topo:all'.
 INFO Experiment: Resetting resources
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [0 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [10 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [20 sec.]
 INFO stdlib: Waiting for nodes (Up/Down/Total): 0/2/2 - (still down: node1-2.sb7.orbit-lab.org,node1-1.sb7.orbit-lab.org) [30 sec.]
 INFO ALL_UP: Event triggered. Starting the associated tasks. 
 INFO exp: Progress(0/0/2): 0/0/0 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 760 sec.
 INFO exp: Progress(0/0/2): 10/10/10 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 750 sec.
 INFO exp: Progress(0/0/2): 10/15/20 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 740 sec.
 INFO exp: Progress(0/0/2): 20/25/30 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 730 sec.
 INFO exp: Progress(0/0/2): 30/35/40 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 720 sec.
 INFO exp: Progress(0/0/2): 40/40/40 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 710 sec.
 INFO exp: Progress(0/0/2): 40/45/50 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 700 sec.
 INFO exp: Progress(0/0/2): 50/55/60 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 690 sec.
 INFO exp: Progress(0/0/2): 60/65/70 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 680 sec.
 INFO exp: Progress(0/0/2): 60/65/70 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 670 sec.
 INFO exp: Progress(0/0/2): 70/75/80 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 660 sec.
 INFO exp: Progress(0/0/2): 90/90/90 min(node1-2.sb7.orbit-lab.org)/avg/max (30) - Timeout: 650 sec.
 INFO exp: Progress(1/0/2): 90/95/100 min(node1-1.sb7.orbit-lab.org)/avg/max (30) - Timeout: 640 sec.
 INFO exp: Progress(2/0/2): 100/100/100 min()/avg/max (30) - Timeout: 630 sec.
 INFO exp:  ----------------------------- 
 INFO exp:  Imaging Process Done 
 INFO exp:  2 nodes successfully imaged - Topology saved in '/tmp/pxe_slice-2013-01-16t14.56.02-05.00-topo-success.rb'
 INFO exp:  ----------------------------- 
 INFO EXPERIMENT_DONE: Event triggered. Starting the associated tasks.
 INFO NodeHandler: 
 INFO NodeHandler: Shutting down experiment, please wait...
 INFO NodeHandler: 
 INFO NodeHandler: Shutdown flag is set - Turning Off the resources
 INFO run: Experiment pxe_slice-2013-01-16t14.56.02-05.00 finished after 3:13