Changes between Initial Version and Version 1 of Tutorials/k0SDR/Tutorial04a


Ignore:
Timestamp:
Dec 14, 2012, 4:30:46 PM (12 years ago)
Author:
nilanjan
Comment:

Legend:

Unmodified
Added
Removed
Modified
  • Tutorials/k0SDR/Tutorial04a

    v1 v1  
     1= Spectrum sensing with USRP2 =
     2
     3== Description ==
     4In this tutorial we'll use the USRPs on the grid for FFT-based spectrum sensing. Each USRP (centered on a frequency with specified bandwidth) will collect data into an OML server for post processing. For details on available USRP2s on the grid, please see [http://www.orbit-lab.org/wiki/Documentation/USRP2_hw_map available USRP2 HW].
     5
     6== Hardware / Software Resources utilized ==
     7 1. Grid nodes with a USRP2 connect via Ethernet.
     8 2. ''ubuntu-11-10-gnuradio.ndz'': disk image loaded onto nodes. This image has all the precompiled - software required to configure the USRPs and analyze recorded data. The USRP2's interface with the node is already configured.
     9 3. omf-5.3: used to image to nodes
     10