Certainly, I've updated the node information in the document to reflect "node1-5" instead of "node1-2". Here it is:

Kubernetes Wiki Doc:

Tutorial: Kubernetes Setup

Requirements:

1. ​Setup/Practice of Orbit Nodes.

2. Any available Orbit Sandbox Node

3. Ubuntu 20.04.5 LTS or Ubuntu 22.04.2 LTS (Choice is up to you)

---

In this tutorial, we will be using one of the sb1 nodes for setting up Kubernetes. However, sb(1-10) should also be capable for Kubernetes setup.

Make sure you have Ubuntu 20.04.5 (baseline20.04.ndz) or 22.04.2 (ubuntu2204-beta.ndz) LTS. To get the Ubuntu Version, follow these steps after ssh'ing into your console. Substitute for the image and node you want.

The below steps illustrate loading Ubuntu 20.04.5 LTS for node1-5 of sb1. For the sb1 console,

username@console:~$ omf tell -t node1-5 -a offh 

username@console:~$ omf load -t node1-5 -i baseline20.04.ndz

username@console:~$ omf tell -t node1-5 -a on

To verify if you have loaded your Ubuntu version properly, use this command after ssh into the node1-5

root@node1-5:~# lsb_release -a

This will list the current version of Ubuntu loaded.

Example Image:

Set up a Kubernetes Cluster

After loading your version of Ubuntu, you can follow the below steps to install Kubernetes

1. Update and Upgrade Packages:

   root@node1-5:~# sudo apt-get update && sudo apt-get upgrade
   

2. Install Docker:

   root@node1-5:~# sudo apt install docker.io
   

3. Configure Docker to use systemd for the management of the container’s cgroups:

   root@node1-5:~# cat <<EOF | sudo tee /etc/docker/daemon.json
   {
     "exec-opts": ["native.cgroupdriver=systemd"],
     "log-driver": "json-file",
     "log-opts": {
       "max-size": "100m"
     },
     "storage-driver": "overlay2"
   }
   EOF
   

4. Enable Docker:

   root@node1-5:~# sudo systemctl enable docker
   

5. Reload the systemd manager configuration:

   root@node1-5:~# sudo systemctl daemon-reload
   

6. Restart Docker:

   root@node1-5:~# sudo systemctl restart docker
   

7. Update and Upgrade Packages again:

   root@node1-5:~# apt update && apt upgrade -y
   

8. Add Kubernetes to the repository list:

   root@node1-5:~# curl -sSL https://packages.cloud.google.com/apt/doc/apt-key.gpg | gpg --dearmor | sudo tee /usr/share/keyrings/kubernetes-archive-keyring.gpg >/dev/null
   

   root@node1-5:~# echo "deb [signed-by=/usr/share/keyrings/kubernetes-archive-keyring.gpg] https://apt.kubernetes.io/ kubernetes-xenial main" | sudo tee /etc/apt/sources.list.d/kubernetes.list
   

9. Install Kubernetes:

   root@node1-5:~# sudo apt-get update
   

   root@node1-5:~# sudo apt-get install -y kubelet kubeadm kubectl
   

   root@node1-5:~# sudo apt-mark hold kubelet kubeadm kubectl
   

10. Initialize the Kubernetes Cluster:

    root@node1-5:~# kubeadm init --pod-network-cidr=10.19.0.0/16
    

You should see an output which includes a kubeadm join command, save this command for use on the worker nodes.

11. Set KUBECONFIG environment variable:

    root@node1-5:~# export KUBECONFIG=/etc/kubernetes/admin.conf
    

12. Apply Flannel network overlay:

    root@node1-5:~# kubectl apply -f https://raw.githubusercontent.com/coreos/flannel/master/Documentation/kube-flannel.yml
    

Joining Worker Nodes to the Cluster

To join worker nodes to the Kubernetes cluster, run the kubeadm join command that was outputted by the kubeadm init command.

Example:

root@node1-5:~# kubeadm join 10.19.1.5:6443 --token o1cttx.z9al8w8ljqcmqb4y --discovery-token-ca-cert-hash sha256:6ecd74d7eca0299b80499cf2e2e1c87c4079c3d234282be5822761880998853e